Carbon Steel Barrel Sucker Rod Pump With API Certificate
Carbon steel barrel sucker rod pump description:
Sucker rod pump is also called insert pump,the feature is that it has two working barrels,the upper end of the outer working barrel is equipment with vertebral body seat and clamp spring
Put the outer working barrel with tubing into the well first,then connect the inner working barrel what is equipment liner and piston in the lower end of the sucker rod, after that put it in the outer barrel, and fixed by a circlip.
This pump barrel uses a suspension structure, thus it improves the load bearing structure and makes the pump work in the deep well. The setting depth of pump could be 500-1500 meters deep. This pump has the following characteristics: to prevent bending, the pump uses the gap bridge structure, the barrel is suspended in the outer section and does not bear any pressure thus, not easy to bend.
Rod pump and tubing pump API technical parameters:
| Type | Major technical data |
| OD(mm) | Barrel Length (m) | Stroke Range (m) | Length of Extension Pub Joint(m) | Thread for Tubing(in) | Connecting sucker rod |
| Rod pumps | 31.8 | 2.1
2.4
2.7 3.0 3.3 3.6 3.9 4.2 4.5 4.8 5.7 6.0 6.6 7.3 9.1 | 1.5-6 | 0.3
0.6
0.9 | 2 3/8 | CYG16 |
| 38.1 | 2 7/8 | CYG19 |
| 44.45 | 2 7/8 | CYG19 |
Tubing
pump | 31.8 | 1.5-7.8 | 0.3 0.6 0.9 | 2 3/8 | CYG16 |
| 38.1 | 2 7/8 | CYG16 |
| 44.45 | 2 7/8 | CYG16 |
| 57.15 | 2 7/8 | CYG19 |
| 69.85 | 2 7/8 3 1/2 | CYG22 |
| 82.55 | 3 1/2 | CYG25 |
| 95.25 | 3 1/2 | CYG25 |
Feature:
1. Rod pump can be pulled out from the well directly.
2. Suspension barrel prevents eccentric wear.
3. Reduce the cost of pumping test.
4. Suitable for the well which setting depth of pump could be deeper 500-1500meters.
Sucker rod pump photo:
Product Tags:
|
|
Carbon Steel Barrel Sucker Rod Pump With API Certificate Images
|
